Swing Gates

We manufacture and install bespoke and standard swing gates suitable for both domestic and commercial use. Here at Access Barriers UK our team is committed to giving you the best advise possible to create a gate that has both the aesthetic appeal and full functionality you desire. We can vary the design of the gate and the way in which they open to allow functionality on a range of slopes. - We offer two mechanisms for power: Underground automatic gate motors, surface automatic gate RAMS. - Underground systems: while these systems tend to be more expensive, they are more aesthetically pleasing as the motors are “hidden” stopping them from detracting from the gate. Due to their design they can open to 180° stopping the gates from potentially encroaching an internal part of the driveway.. - RAMS: This system usually requires steel posts on which to pivot and a vital operating geometry to operate effectively. The opposite end of the gate RAM is attached to the inside of the gate leaf allowing the RAM to open the gate by pulling the gate open and pushing it shut. While not as aesthetically pleasing they offer an effective lower cost solution and can be hidden behind certain gate features to provide a clean look from the outside. Safety is always important so to make sure our gates comply with current DHF Regulations they come with: - Safety edges - Photocells - Safe by design hinges - Fingerguards

Automatic Sliding Gates

* Summary: * Automated sliding gates provide a secure access barrier to your property, a simple but effective tacked sliding gate can be located; normally at vehicle access locations to control who is entering and exiting the property. The operation of the gate can be tailored to your requirements. * Info: * Length 3m – 8m & Height 1m – 2.4m. * Finish: * We can provide a variety of finishes. We recommend with all mild steel gates a galvanised protection with a powder coated finish. The infill (the space inside the gate frame) can be filled with the following Security mesh, wooden planks steel bars, aluminium planks. Additional options can be discussed. * Applications: * These gates are ideal to secure a residential or commercial properties, ideal for offices, car parks, commercial estates, factories.

Cantilever Sliding Gate

* Summary: * Cantilever gates are ideal for achieving protection of a large openings where the run back is available, it is also ideal for areas where the finished floor is uneven or sloping. The gate cantilevers/floats above the opening as it moves. * Info: * Length 3m – 12m & Height 1m – 2.4m. * Finish: * We can provide a variety of finishes. We recommend with all mild steel gates a galvanised protection with a powder coated finish. The infill (the space inside the gate frame) can be filled with the following Security mesh, wooden planks steel bars, aluminium planks. Additional options can be discussed * Applications: * These gates are ideal to secure a residential or commercial properties, ideal for offices, car parks, commercial estates, factories.

Telescopic Sliding Gates

* Summary: * Telescopic gates are ideal for achieving protection of a large opening where the run back is restricted, this can be made with up of a maximum of three gate leaves, allowing for run back to be reduced by up to 75%, compared to a single leaf gate. * Info: * Length 3m – 12m, Height 1m-2.4m width varies (dependent on amount of gate leaves required). * Finish: * We can provide a variety of finishes. We recommend with all mild steel gates a galvanised protection with a powder coated finish. The infill (the space inside the gate frame) can be filled with the following Security mesh, wooden planks steel bars, aluminium planks. Additional options can be discussed. * Applications: * These gates are ideal to secure a commercial or residential properties, ideal for offices, car parks, commercial estates, factories and other areas where large opening are required.

Security Gates

* Summary: * Security Gates are great solution when you are trying to secure your property or business and stop any unauthorised access. We offer a wide range of designs to from palisade or meshed infill to keyed or padlocked security locks and offering pedestrian access gates right through to vehicle entrance gates. We offer design manufacture and install options, with both a manual or automated solutions available. * Info: * Security Gates, Sizes 1m to 8m wide by 1.8m to 2.8m high * Finish: * Galvanised, Powder coated as standard but we can offer other finishes at request. * Applications: * Residential Properties, Commercial Properties, Carparks & Factories, Please call * 0121 725 1631 * to book your site survey today.